Read 1205 times

  • Dogs917
  • Newgookin

    • 1

    • November 04, 2015, 07:56:55 pm
How to use thermostat
« on: November 04, 2015, 08:09:48 pm »
I've seen several threads about thermostats, but not about this specific one. I don't really understand how to use it, and my water heater seems to be constantly heating.


  • dickierok
  • Waygookin

    • 10

    • October 31, 2012, 04:10:35 pm
    • Yongin
Re: How to use thermostat
« Reply #1 on: November 06, 2015, 05:26:24 pm »
This looks to be something similar, but not exactly it. Give it a go.

http://eng.celtic.co.kr/eng/pdf/DSR-220.pdf



  • Imogen1991
  • Hero of Waygookistan

    • 1109

    • March 18, 2015, 12:26:47 am
    • Ho Chi Minh City, Vietnam
Re: How to use thermostat
« Reply #2 on: November 06, 2015, 06:41:14 pm »
http://www.waygook.org/index.php?topic=3889.0

check out this thread theres a couple of pages i didnt look through but have a check to see if your thermostat is in there.


  • Pecan
  • The Legend

    • 3769

    • December 27, 2010, 09:14:44 am
    • Seoul
Re: How to use thermostat
« Reply #3 on: November 06, 2015, 06:51:44 pm »
I've seen several threads about thermostats, but not about this specific one. I don't really understand how to use it, and my water heater seems to be constantly heating.
This is close enough: http://eng.celtic.co.kr/eng/pdf/DSR-220.pdf


Re: How to use thermostat
« Reply #4 on: November 10, 2015, 09:17:39 pm »
left hand side black switch. 

Shileun is for turning on the gas for your water.  (Summer setting.)  Ondol is to heat the room.  (Winter setting.)

Nanbang is heater.  Onsu is hot water. 

17 degrees is your room temperature - quite comfortable to me with a light sweatshirt. 

40 degrees is your water temperature or what it's heated at the source and not necessarily what comes out of your tap. 

Jeonwon is to turn it on or off.

Yeyak is not important.  I never use the switch on mine.  Ignore it.  Might just be the intensity or something but don't quote me on it.  Might also heat it up more quickly. 

I hope you read Hanguel so you know what I mean. 

In the winter here, turn it off in the morning and turn it on in the evening after you get home.  I'll prob turn mine on by December 1st.  Not too cold here anyways.  If by chance there are a couple of days in January where the entire day temps stay near 0 degrees or under it, leave the heat on but use a low setting all day so your pipes don't freeze.  Otherwise, you don't need it and are wasting energy unlike back home where it's really cold.